What to do when nobody is available
Six ways out of a scheduling deadlock: widen the window, split the group, change the format, rotate the pain, decide by proxy or drop the meeting.
Published 7 November 2026
You offered four slots across two weeks. Eight people answered. Every slot has at least two people who cannot make it, and the two people who are free on Thursday are the two who could most easily be spared. This is not a failure of your poll. It is the normal result of asking busy people for a shared hour, and it has a small number of standard exits. Work through them in order, because the cheap ones come first.
First, read the result properly
Before changing anything, look at who is unavailable, not just how many. A slot that loses three people who are optional is a better slot than one that loses one person whose sign-off you need. Sort the group into three tiers: must attend, should attend, nice to have. Then re-read every slot with only the first tier in view. Often a deadlock with eight people is no deadlock at all with the three who matter.
Also check how people said no. If one person has marked every single slot unavailable, that is not a scheduling fact, it is a message: they are overloaded, or they do not think the meeting needs them, or they did not understand the form. One short reply ("Is there any week in the next month that works for you?") usually resolves it faster than another round of options.
Six ways out, cheapest first
1. Widen the window
Most deadlocks come from a window that was too narrow to begin with. Four slots in one week gives each person four chances to be free. Eight slots across three weeks gives them eight, and the odds that one of those clears everyone rise sharply. Add early mornings and the hour after the usual close of play if your group will tolerate them. Ask for a second round with the new slots only, so nobody has to re-enter what they already told you.
A rule of thumb: for a group of six or more, propose at least two slots per person you need, spread over at least two weeks. If you proposed fewer than that, widen before trying anything else.
2. Split the group
If the clash is structural (the two teams you are trying to bring together have opposite working patterns, or one person is in a time zone that is asleep whenever the rest are awake), stop trying to hold one meeting. Hold two shorter ones with the same agenda, and have the organiser or one representative sit in both. A thirty-minute session twice costs you an extra half hour; a week of chasing costs far more.
The trap here is that the second meeting becomes the lesser one. Avoid that by making the decisions in writing after both have happened, not in whichever room happened to meet first.
3. Change the format
Ask what the meeting is for. If it is to inform, record a ten-minute video or write a page and let people read it when they can. If it is to collect opinions, a shared document with a deadline gathers them without anyone being in the same hour. If it is to decide, you may need only the deciders live and everyone else asynchronous. A surprising number of "we must all get together" meetings are really one of these three in disguise.
A good hybrid: put the briefing in writing a day ahead, then hold a fifteen-minute call purely for the decision. Fifteen-minute slots are far easier to find than hour-long ones.
4. Rotate the pain
For a recurring meeting that spans an awkward spread of hours or commitments, nobody should carry the bad slot every time. If the only slot that works is 07:30 for the people on one side and 18:30 for the rest, alternate: one week the early birds suffer, the next the late ones. Say this openly in the invitation, so people know the discomfort is shared and temporary. Groups accept a bad time far more readily when they can see it is their turn rather than their lot. The guide to recurring meetings and standing groups covers how to run that rotation poll by poll.
5. Decide by proxy
If one person blocks every workable slot and the meeting cannot wait, ask them to nominate someone, or to send their view in writing beforehand and accept the outcome. Put it to them as a choice: "We can meet Tuesday without you if you send your points by Monday, or we can wait until the week after next." Most people, faced with that, pick the proxy. The meeting then goes ahead with their input and without their hour.
6. Drop the meeting
Sometimes a deadlock is the group telling you something. If, after widening the window and tiering the attendees, there is still no slot that works for the people who matter, the honest conclusion may be that the meeting is not important enough to the people you are asking. Cancel it, say why in one sentence, and handle the one or two live questions by message. Nobody will mind, and you will have your week back.
A worked example
A residents' association needs its committee of seven to approve next year's budget. Four slots go out over one week; the best slot loses the treasurer and one other. Rather than re-poll everyone, the convenor does three things in turn.
- Tiers the group. Only the treasurer, the chair and the convenor must be present for the vote to count. Re-reading the result with those three in view, Wednesday evening works for all of them and loses only two optional members.
- Changes the format for the rest. The budget paper goes out by message two days ahead with a request for written comments, so the two absent members still have a say.
- Rotates the pain for next time. Wednesday evening is hard for one member every month, so the following quarter's meeting is pencilled for a Saturday morning instead.
The budget passes on the Wednesday with five in the room and two sets of written comments on the table. No second poll, no deadlock, and the member who always loses Wednesday knows that the next one is theirs.
Preventing it next time
- Propose more slots than feels polite. People would rather tick a long list once than answer twice.
- Name the must-attend people in the invitation, so the optional ones feel free to say no honestly.
- Give a deadline for answers of two or three days. Open-ended polls drift and the early answers go stale.
- Keep the meeting short. Thirty minutes finds a home where ninety cannot; see choosing a meeting length.
- Agree the next date at the end of each meeting while everyone has a calendar open.
The first step above, reading the result properly, is quicker when the answers were ranked rather than ticked: FINDaTIME shows, for each slot, how many people are unavailable and who can make it, so tiering the group is a matter of looking down the list. Create a free poll, add the committee by email address, and send the invitations when the slots are ready; a deadlock, if one comes, arrives with the way out already visible.
